May 31, 2009


I had fun changing a nine patch and playing with it. I would like to share it with you.
Use 1/4" seam allowances for all pieceing. Cutting and instructions are for one block.
Purple: Cut (2) pieces 2-1/2" x 7" and (1) piece 2-1/2" x 3".
White: Cut (2) pieces 2-1/2" x 3" and (1) piece 2-1/2" x 7".
Black connecting strips: Cut (1) strip 3/4" x 16", (2) pieces 3/4" x 3", and (2) pieces
3/4" X 7".
Sewing instructions: Sew (2) 2-1/2" x 7" purple, (1) 2-1/2" x 7" white, and (2) 3/4" x 7" black pieces together to create a strip as shown in the picture below. NOTE: The length of strips in the picture aren't accurate. The picture is a guide to show how the fabrics are pieced together. Press all purple/black seams to the purple and the white/black seams to the black. From this strip crosscut (2) 2-1/2" sections. Set aside.

Sew the following pieces together to create the center section. (1) 2-1/2" x 3" purple,
(2) 2-1/2" X 3" white, and (2) 3/4" x 3" black pieces. Note: Press seams as instructed above.
See picture below. Trim this section to measure 2-1/2" wide.

Measure the length of your sections. Ours measured 7-1/4" long. Cut (2) pieces this length from the 3/4" x 16" black strip. Using the picture below as a guide sew the three sections and the two black pieces together. Press seams to one side.

Have fun playing with this block. Create your own project with it. I would love to see how you used it. If you would like send a picture to me at
Till next time,

No comments:

Post a Comment